calme c5 flash file
calme c5 flash file 100% Tested File Downloads Free By modernmobile42.com
SC6531_SPI_GIGADEVICE_GD25Q_4MiB
Card found : CEA8927D , v0138Infinity-Box Chinese Miracle II : SC/RDA Module [SCR] v1.04
SCRD mode : AUTOSPRD mode : SC6530 : REV : 0000 : NOR : [ 4MB-8MB ]
SPRD mode : SC6531 : REV : E001 : NOR : [ 4MB-8MB ]
Operation : Read UserCode [ v1.04 ]
MODE : From Device1. Power off device2. Press and hold BootKey or use BootCable3. Insert cable and battery in device!Wait for device ...
Device Connected!BootVersion : SPRD3BootSource : InternalLibraryBootVersion : Infinity SCR 6531EFM v1.1 (c)2019ERROR : Baud set failed! Use default!FDL Flash : Control transfered!
Boot Done!
Error : PMT info not found! Damaged device MCU code!Send log and report.log to support! Include device info also!
Reconnect Power/Cable!
Operation : Read UserCode [ v1.04 ]
MODE : From Device1. Power off device2. Press and hold BootKey or use BootCable3. Insert cable and battery in device!
Wait for device ...
Device Connected!BootVersion : SPRD3BootSource : InternalLibraryBootVersion : Infinity SCR 6531EFM v1.1 (c)2019Port speed : 921600FDL Flash : Control transfered!
Boot Done!
CS0_MEM : SPI : [GIGADEVICE] : GD25Q32 : 0x00400000 [ 4MiB ]
Reading data ... Sorting data ... STATE : NOT ACTIVE : CODE : 0000
Done!Elapsed: 00:00:32
Reconnect Power/Cable!
SPRD mode : SC6530 : REV : 0000 : NOR : [ 4MB-8MB ]
SPRD mode : SC6531 : REV : E001 : NOR : [ 4MB-8MB ]
Operation : Read Flash [ v1.04 ]
1. Power off device2. Press and hold BootKey or use BootCable3. Insert cable and battery in device!
Wait for device ...
Device Connected!BootVersion : SPRD3BootSource : InternalLibraryBootVersion : Infinity SCR 6531EFM v1.1 (c)2019Port speed : 921600FDL Flash : Control transfered!
Boot Done!
CS0_MEM : SPI : [GIGADEVICE] : GD25Q32 : 0x00400000 [ 4MiB ]
Read Ok, 4194304 bytes
Done!Elapsed: 00:01:07
Reconnect Power/Cable!
Card found : CEA8927D , v0138
Infinity-Box Chinese Miracle II : SC/RDA Module [SCR] v1.04
SCRD mode : AUTO
SPRD mode : SC6530 : REV : 0000 : NOR : [ 4MB-8MB ]
SPRD mode : SC6531 : REV : E001 : NOR : [ 4MB-8MB ]
Operation : Read UserCode [ v1.04 ]
MODE : From Device
1. Power off device
2. Press and hold BootKey or use BootCable
3. Insert cable and battery in device!
Wait for device ...
Device Connected!
BootVersion : SPRD3
BootSource : InternalLibrary
BootVersion : Infinity SCR 6531EFM v1.1 (c)2019
ERROR : Baud set failed! Use default!
FDL Flash : Control transfered!
Boot Done!
Error : PMT info not found! Damaged device MCU code!
Send log and report.log to support! Include device info also!
Reconnect Power/Cable!
Operation : Read UserCode [ v1.04 ]
MODE : From Device
1. Power off device
2. Press and hold BootKey or use BootCable
3. Insert cable and battery in device!
Wait for device ...
Device Connected!
BootVersion : SPRD3
BootSource : InternalLibrary
BootVersion : Infinity SCR 6531EFM v1.1 (c)2019
Port speed : 921600
FDL Flash : Control transfered!
Boot Done!
CS0_MEM : SPI : [GIGADEVICE] : GD25Q32 : 0x00400000 [ 4MiB ]
Reading data ...
Sorting data ...
STATE : NOT ACTIVE : CODE : 0000
Done!
Elapsed: 00:00:32
Reconnect Power/Cable!
SPRD mode : SC6530 : REV : 0000 : NOR : [ 4MB-8MB ]
SPRD mode : SC6531 : REV : E001 : NOR : [ 4MB-8MB ]
Operation : Read Flash [ v1.04 ]
1. Power off device
2. Press and hold BootKey or use BootCable
3. Insert cable and battery in device!
Wait for device ...
Device Connected!
BootVersion : SPRD3
BootSource : InternalLibrary
BootVersion : Infinity SCR 6531EFM v1.1 (c)2019
Port speed : 921600
FDL Flash : Control transfered!
Boot Done!
CS0_MEM : SPI : [GIGADEVICE] : GD25Q32 : 0x00400000 [ 4MiB ]
Read Ok, 4194304 bytes
Done!
Elapsed: 00:01:07
Reconnect Power/Cable!
Password:modernmobile42.com
Downloads Firmware Free Please Feedback by Comments.