qmobile qinfinity cinema 2 flash file

 qmobile qinfinity cinema 2 flash file 100% Tested File Downloads By modern mobile


qmobile qinfinity cinema 2 flash file
SP7731GEA_HDR_Infinity_Cinema_2_8.1_J106_EG01_Infinity_Cinema_2_V1.0_20190828_Infinity_Cinema_2
qmobile qinfinity cinema 2 flash file
SP7731GEA_HDR_Infinity_Cinema_2_8.1_J106_EG01_Infinity_Cinema_2_V1.0_20190828_Infinity_Cinema_2
qmobile qinfinity cinema 2 flash file
SP7731GEA_HDR_Infinity_Cinema_2_8.1_J106_EG01_Infinity_Cinema_2_V1.0_20190828_Infinity_Cinema_2
qmobile qinfinity cinema 2 flash file
SP7731GEA_HDR_Infinity_Cinema_2_8.1_J106_EG01_Infinity_Cinema_2_V1.0_20190828_Infinity_Cinema_2
qmobile qinfinity cinema 2 flash file
SP7731GEA_HDR_Infinity_Cinema_2_8.1_J106_EG01_Infinity_Cinema_2_V1.0_20190828_Infinity_Cinema_2

Created by Infinity-Box (c) Chinese Miracle II (c) 2017
Device Brand: android_1
Device Model: Infinity_Cinema_2
Device CPU: sp7731gea_hdr
Device IntName: Infinity_Cinema_2
Device Version: 8.1
Device Compile: 8/28/2019 10:17:53 AM
Device Project: J106_EG01_Infinity_Cinema_2_V1.0_20190828
Device ExtInfo: Infinity Cinema 2
Chinese Miracle II  [SPD module] v 1.27

Set mode to : SP [SC773x] eMMC [Android 5.x]

Operation : Format File System / Reset Settings [ v1.27 ]
Settings: SmartFormat is On

1. Remove the battery. Insert battery back
2. Press and hold 'VolumeUp' and 'volume down' keys
 -> Alternative : just ONE 'VolumeUp' or 'volume down' key 
3. Insert the cable

 ====  Wait for phone...

Phone found! [ 48 ]
Port Opened
Sync...
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync...
Sending FDL
[Info]: If SW freeze here for more, than 15 seconds - remove the cable
FDL Ready!
Boot Ver : SC773x Android 5.x eMMC v1.0 Inf 
Sending FLASH FDL
FLASH FDL Ready!
Boot Ok!

flash mode Set: Ok!
Checking Structure ... 
Detected eMMC Flash, Structure detect Ok!

eMMC phone detected! Will use 'Safe Format' mode!

Mount : /data
Size  : 0x00000001754F7000
State : 0x0001

Mount : /cache
Size  : 0x0000000009600000
State : 0x0001

Prepare Ok! Format Ok!
Don't touch the phone, until it fully bootup to "Welcome Screen"!

Android 5.x/6.x: Reset FRP Lock
Reset Ok!


Done!

Elapsed: 00:00:39

Reconnect Power/Cable!

Operation : Read FullFlash [ v1.27 ]

1. Remove the battery. Insert battery back
2. Press and hold 'VolumeUp' and 'volume down' keys
 -> Alternative : just ONE 'VolumeUp' or 'volume down' key 
3. Insert the cable

 ====  Wait for phone...

Phone found! [ 48 ]
Port Opened
Sync...
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync...
Sending FDL
[Info]: If SW freeze here for more, than 15 seconds - remove the cable
FDL Ready!
Boot Ver : SC773x Android 5.x eMMC v1.0 Inf 
Sending FLASH FDL
FLASH FDL Ready!
Boot Ok!

flash mode Set: Ok!
Detected eMMC Flash, Structure detect Ok!

[FW_READER]: Prepare Ok!
- > Wait phone connected ... 

Phone found! [ 48 ]
Port Opened
Sync...
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync...
Sending FDL
[Info]: If SW freeze here for more, than 15 seconds - remove the cable
FDL Ready!
Boot Ver : SC773x Android 5.x eMMC v1.0 Inf 
Sending FLASH FDL
FLASH FDL Ready!
Boot Ok!

- > Wait phone connected ... 

Phone found! [ 48 ]
Port Opened
Sync...
InitBoot Done [ 0x81 ] , Ver : SPRD3
Sync...
Sending FDL
[Info]: If SW freeze here for more, than 15 seconds - remove the cable
FDL Ready!
Boot Ver : SC773x Android 5.x eMMC v1.0 Inf 
Sending FLASH FDL
FLASH FDL Ready!
Boot Ok!

Model Name: Infinity_Cinema_2
Model Brand: android_1
Model Device: Infinity_Cinema_2
Anderson: 8.1
BaseBand CPU: SP7731GEA_HDR
Project Ver: J106_EG01_Infinity_Cinema_2_V1.0_20190828
Model Ext: Infinity Cinema 2

[Read Mode] : HSUSB : 0x3000

[FW_READER]: Reading Firmware Now ... 

[Read Ok] : u-boot-spl-16k.bin
[Read Ok] : u-boot.bin
[Read Ok] : prodnv.img
[Read Ok] : sc7731g_CP0_modem.bin
[Read Ok] : DSP_DM_Gx.bin
[Read Ok] : nvitem_w.bin
[Read Ok] : sc8830g_modem_CP2_WCN_14D_W16.26.3_Release.bin
[Read Ok] : nvitem_wcn.bin
[Read Ok] : logo_480x960.bin
[Read Ok] : fblogo_480x854.bin
[Read Ok] : logo2.bin
[Read Ok] : logo3.bin
[Read Ok] : logo4.bin
[Read Ok] : logo5.bin
Skip [EMP] : LOGO6
Skip [EMP] : LOGO7
Skip [EMP] : LOGO8
Skip [EMP] : LOGO9
Skip [EMP] : LOGO10
[Read Ok] : boot.img
[Read Ok] : system.img
[Read Ok] : sysinfo.img
[Build Ok] : cache.img
[Read Ok] : recovery.img
[Build Ok] : userdata.img

AndroidInfo created
Firmware Size: 1399 MiB
Saved to : C:\Users\BASITNAZEER\Desktop\SP7731GEA_HDR_Infinity_Cinema_2_8.1_J106_EG01_Infinity_Cinema_2_V1.0_20190828_Infinity_Cinema_2\
Done!

Elapsed: 00:12:10

Reconnect Power/Cable!

Please Read before Download Software jo humari password wali file hain unka password free ni hai. password apko ni milea ga hum apko file Anydesk Software k Through unzip kr k thain gea. file lenea se pahlea ye jaan lain k apko baad main payment return ni hogi.
Password: Not Free  
Downloads Firmware Free Please Feedback by Comments.

Suggested Alternatives

Post a Comment

0 Comments