huawei y7 prime (ldn-l21)2018 flash file umt

 Huawei y7 prime (ldn-l21)2018 flash file umt 100% Tested File Downloads Free By modern mobile

Huawei y7 prime (ldn-l21)2018 flash file umt
unknown_System 8.0.0.073(0ALE)_2020-09-01
Huawei y7 prime (ldn-l21)2018 flash file umt
unknown_System 8.0.0.073(0ALE)_2020-09-01
Huawei y7 prime (ldn-l21)2018 flash file umt
unknown_System 8.0.0.073(0ALE)_2020-09-01

Device : Huawei Y7 Prime 2019 (LDN-L21)
Operation : Read Firmware
Checking for existing devices...Not Found
Turn Off phone, hold Vol UP + Vol DOWN and insert USB cable.
Some phones may need Special Boot Cable or TestPoint for EDL mode.
Found Port : Qualcomm HS-USB QDLoader 9008 (COM39)
Driver Info : Qualcomm Incorporated, qcusbser.sys, 2.1.2.7
Connecting to phone...OK
Waiting for response...OK
Init Handshake Sequence...OK
Hardware ID : E1F00400 [8937] 41001500
OPK_DATA : 3B48AE9023196AE5C8162BCE65CB66E9636C784CB52A55046D15110FD8B11688
Initializing Protocol...OK
Using Auto Loader Selection [1]
Preparing Loader...Done
Sending Loader [8937_034]...Done
Executing Loader...OK
Detecting Storage Type...OK
Hardware : 8937, EMMC, 32 GB
LU Count : 3 [0x03A3E000] [0x00002000] [0x00002000] 
WARNING! High Speed Driver is not installed.
Please install driver from QcFire\Drivers folder using Device Manager.
Payload Info : In: 262144 [4096], Out: 16384, Sector Size: 512
Reading Partition Table...OK
USERDATA : Encrypted
Reading USERDATA will cause large firmware size and slow read speed.
Reading Device Information...OK
Device : unknown
Software : System 8.0.0.073(0ALE), eng.root.20211118.105439 [Thu Nov 18 10:54:39 CST 2021]
Android Ver. : 8.0.0
Patch Level : 2020-09-01
Reading [sbl1]...Done
Reading [rpm]...Done
Reading [tz]...Done
Reading [devcfg]...Done
Reading [dsp]...Done
Reading [lksecapp]...Done
Reading [aboot]...Done
Reading [cmnlib]...Done
Reading [cmnlib64]...Done
Reading [keymaster]...Done
Reading [DDR]...Done
Reading [sec]...Done
Reading [misc]...Done
Reading [modem]...Done
Reading [cache]...Done
Reading [persist]...Done
Reading [vendor]...Done
Reading [cust]...Done
Reading [system]...Done
Reading [gpt_main0]...Done
Reading [gpt_back0]...Done
Reading [gpt_main1]...Done
Reading [gpt_back1]...Done
Reading [gpt_main2]...Done
Reading [gpt_back2]...Done
Saved to : C:\UMTool\QcFire\Read\unknown_System 8.0.0.073(0ALE)_2020-09-01\
Operation Finished.
QcFire Ver. 8.8








0% ?
Next Post Previous Post
No Comment
Add Comment
comment url