G'Five Rock SPD6531E Flash File 100% Tested File Downloads Free
G'Five Rock SPD6531E Flash File 100% Tested File Downloads Free By modernmobile42.com
SPRD_SPI_GIGADEVICE_GD25Q_4MiB
Card found : CEA8927D , v0137
Infinity-Box Chinese Miracle II : SC/RDA Module [SCR] v1.04
SCRD mode : AUTO
SPRD mode : SC6530 : REV : 0000 : NOR : [ 4MB-8MB ]
SPRD mode : SC6531 : REV : E001 : NOR : [ 4MB-8MB ]
Operation : Format FileSystem [ v1.04 ]
1. Power off device
2. Press and hold BootKey or use BootCable
3. Insert cable and battery in device!
Wait for device ...
Device Connected!
ERROR : Protocol HandShake failed!
Error : Fail to init protocol!
Remove battery, cable. Check cable and connection. Repeat operation!
Reconnect Power/Cable!
Operation : Read Flash [ v1.04 ]
1. Power off device
2. Press and hold BootKey or use BootCable
3. Insert cable and battery in device!
Wait for device ...
Device Connected!
BootVersion : SPRD3
BootSource : InternalLibrary
BootVersion : Infinity SCR 6531EFM v1.1 (c)2019
Port speed : 921600
FDL Flash : Control transfered!
Boot Done!
CS0_MEM : SPI : [GIGADEVICE] : GD25Q32 : 0x00400000 [ 4MiB ]
Read Ok, 4194304 bytes
Saved to : C:\Users\BASIT NAZZEER\Desktop\SPRD_SPI_GIGADEVICE_GD25Q_4MiB.bin
Done!
Elapsed: 00:01:09
Reconnect Power/Cable!
Operation : Format FileSystem [ v1.04 ]
1. Power off device
2. Press and hold BootKey or use BootCable
3. Insert cable and battery in device!
Wait for device ...
Device Connected!
BootVersion : SPRD3
BootSource : InternalLibrary
BootVersion : Infinity SCR 6531EFM v1.1 (c)2019
ERROR : Baud set failed! Use default!
FDL Flash : Control transfered!
Boot Done!
Error : PMT info not found! Damaged device MCU code!
Send log and report.log to support! Include device info also!
Reconnect Power/Cable!
Operation : Format FileSystem [ v1.04 ]
1. Power off device
2. Press and hold BootKey or use BootCable
3. Insert cable and battery in device!
Wait for device ...
Device Connected!
BootVersion : SPRD3
BootSource : InternalLibrary
BootVersion : Infinity SCR 6531EFM v1.1 (c)2019
Port speed : 921600
FDL Flash : Control transfered!
Boot Done!
CS0_MEM : SPI : [GIGADEVICE] : GD25Q32 : 0x00400000 [ 4MiB ]
Make backup of sensetive data
Backup saved to : C:\InfinityBox\CM2SCR\Backup\00400000_FMT_BACK_1783115297E2_NVM.nv
Executing FormatFFS ...
Format FFS Done!
Done!
Elapsed: 00:00:30
Reconnect Power/Cable!
Password:modernmobile42.com
Downloads Firmware Free Pleaze Feedback by Comments.
Please Make A Backup Before Flash Your Device.
All File 100% Tested Download And Enjoy.