qmobile tubelight flash file 100% Tested File Downloads Free By modernmobile42.com

                                               

SC6531_SPI_GIGADEVICE_GD25Q_4MiB

Card found : CEA8927D , v0138

Infinity-Box Chinese Miracle II : SC/RDA Module [SCR] v1.04

SCRD mode : AUTO

SPRD mode : SC6530 : REV : 0000 : NOR : [ 4MB-8MB ]

SPRD mode : SC6531 : REV : E001 : NOR : [ 4MB-8MB ]

SPRD mode : SC6531 : REV : E001 : NOR : [ 4MB-8MB ]

Operation : Read UserCode [ v1.04 ]

MODE : From Device

1. Power off device

2. Press and hold BootKey or use BootCable

3. Insert cable and battery in device!

Wait for device ... 

Device Connected!

ERROR : Protocol HandShake failed!

Error : Fail to init protocol!

Remove battery, cable. Check cable and connection. Repeat operation!

Reconnect Power/Cable!

Operation : Read UserCode [ v1.04 ]

MODE : From Device

1. Power off device

2. Press and hold BootKey or use BootCable

3. Insert cable and battery in device!

Wait for device ... 

Device Connected!

BootVersion : SPRD3

BootSource  :  InternalLibrary

BootVersion : Infinity SCR 6531EFM v1.1 (c)2019

Port speed : 921600

FDL Flash  : Control transfered!

Boot Done!

CS0_MEM : SPI : [GIGADEVICE] : GD25Q32 : 0x00400000 [ 4MiB ]

Reading data ... 

Sorting data ... 

STATE : NOT ACTIVE : CODE : 2231

Done!

Elapsed: 00:00:32

Reconnect Power/Cable!

SPRD mode : SC6530 : REV : 0000 : NOR : [ 4MB-8MB ]

SPRD mode : SC6531 : REV : E001 : NOR : [ 4MB-8MB ]

Operation : Format FileSystem [ v1.04 ]

1. Power off device

2. Press and hold BootKey or use BootCable

3. Insert cable and battery in device!

Wait for device ... 

Device Connected!

BootVersion : SPRD3

BootSource  :  InternalLibrary

BootVersion : Infinity SCR 6531EFM v1.1 (c)2019

Port speed : 921600

FDL Flash  : Control transfered!

Boot Done!

CS0_MEM : SPI : [GIGADEVICE] : GD25Q32 : 0x00400000 [ 4MiB ]

Make backup of sensetive data

Backup saved to : C:\InfinityBox\CM2SCR\Backup\00400000_FMT_BACK_1F90B96A1627_NVM.nv

Executing FormatFFS ... 

Format FFS Done!

Done!

Elapsed: 00:00:30

Reconnect Power/Cable!

SPRD mode : SC6531 : REV : 0000 : NOR : [ 4MB ]

SPRD mode : SC6531 : REV : E001 : NOR : [ 4MB-8MB ]

Operation : Read Flash [ v1.04 ]

1. Power off device

2. Press and hold BootKey or use BootCable

3. Insert cable and battery in device!

Wait for device ... 

Device Connected!

BootVersion : SPRD3

BootSource  :  InternalLibrary

BootVersion : Infinity SCR 6531EFM v1.1 (c)2019

Port speed : 921600

FDL Flash  : Control transfered!

Boot Done!

CS0_MEM : SPI : [GIGADEVICE] : GD25Q32 : 0x00400000 [ 4MiB ]

Read Ok, 4194304 bytes

Saved to : C:\Users\BASIT NAZZEER\Desktop\SC6531_SPI_GIGADEVICE_GD25Q_4MiB.bin

Done!

Elapsed: 00:01:10

Reconnect Power/Cable!